Our Solar Road Stud (SRS) provides clearly visible traffic guidance in all weather conditions. After being energized by the sun, the SRS automatically starts to flash when night falls or with the onset of inclement weather. The bright yellow flashing LEDs are highly effective at getting the attention of drivers – much earlier than conventional road studs. This advanced warning gives drivers more time to avoid or navigate danger zones.
The SRS can be used to mark traffic hazards such as median strips, provide toll booth lane control at bridges and tunnels, and for traffic guidance on sharp corners in fog prone areas.
Our experience shows that the SRS has a lifetime of over 5 years. We offer a one year limited warranty on the fixture.
Why Our SRS is Better
Size : 5.2 x 4.8 x .78 inches (132x122x20 mm)
Weight : 17 ounces (500 g)
Shaft Diameter: Ø 1.1 inches (28 mm)
Installation Instructions for the Solar Road Stud:
Distance between studs:
Approximately 16-20 feet (5-6m) for roadways and freeways.
Approximately 6-10 feet (2-3m) for dangerous entrances and exits.
Approximately 1.6-6.5 feet (0.5-2m) for entrances and exits of hospitals, parking garages, etc.
Diameter: 1.18-1.25″ (30-32mm)
Depth: 2.3-2.5″ (60-65mm)
Make sure the glue has dried completely and the stud has settled before the lane is reopened to traffic.